The Handling Way on Cinder Bricks by Mining Rotary Kiln

December 13, 2012 12:11 AM0 commentsViews: 5

The rotary kiln under the action of raw materials in the friction with the wall together rises slowly, when it was turned to a certain height. I.e. the horizon of raw material surface layer is equal to the viewpoint of the formation of the accumulation of raw material, the raw materials particles falls because of gravity; it slides along the material layer. Because the rotary kiln have certain gradient, and raw materials particles rolling, the biggest direction along the slope down, so it moves forward a certain distance.

The rotary kiln as one of the main drying equipment, its usage is very wide: building material, metallurgy, chemical, environmental protection and other industries. It is also widely used for turning round of solid materials machinery, physical or chemical processing. The rotary kiln can be used to burn the cement forging outside, it can still be used to forge the clay, limestone and slag drying, etc. Fire-proof material production, the rotary kiln forging the raw material, makes its size stability, increase strength, and then process molding. Non-ferrous and black metallurgy, iron, aluminum, copper, zinc, tin, nickel, tungsten, chromium, file metal, which can be used in smelting equipment in rotary kiln of minerals, concentrate, intermediate objects of sintering, roasting.

For rotary kiln in coke out of the brick, it can adopt the following methods:

Prevention, closely monitor the tropical fire, when find the tropical fire in the trend, you will advance from the tropical rear high temperature gas extraction. Before the fire becomes big, put it out as early as you can. Regardless of whether waste heat utilization system, reduce the height of each and conducive to the control of fire degrees. When firing them big, the fire will produce waste heat gates mentioned before and after several distributed to a fire. If you carry fire place of waste heat gates, it will not only can’t scatter fire, but focus on fire. When the fire is big, the first to fall far and near low sluice gates, as well as the waste heat gates, should strengthen into air volume and cool. Additional, you still can carefully filed with the heat preservation. But it is worth that you couldn’t carry the fire of the Lord in avoiding, because it not only can’t scatter fire, but also will on fire. Thus, it will appear focal brick, even lump or fall kiln accidents.

When raw materials in the stove move, the raw material of particle movement way is cyclical change, or buried in material layer inside and kiln movement together, or to the material on the surface layer and came down. But only in the raw material along the surface layer of particles landing in the process, it can grow along the kiln direction. Raw materials in the stove movement will affect the raw materials in the residence time of furnace (namely raw material heating time); raw materials in the filling coefficient of furnace (namely raw material heated area); Turning the size of materials, also affect the uniformity of raw materials (namely affect combustion products and raw material surface temperature).

As the professional manufacturer of complete sets of mining machinery, such as sand washing plant, vibrating feeder, Henan Hongxing is always doing the best in products and service.

stone impact crusher: http://www.hxjq-mill.com/products/impact_crusher.html
barite grinding mill: http://www.hx-crusher.com/n278.html

Leave a Reply


amazing online casino games